STEEL WEB Belt
4B Braime SW 2500* STEEL WEB Belt
4B’s STEEL WEB belt is a rubber elevator belt with a special steel cord core. The cords provide low elongation with high elasticity in the length, and cross rigidity in the width. The built-in elasticity allows running over slightly crowned pulleys which greatly improves belt tracking. The rigid weft cords act as a barrier to ripping and tearing which increases the holding ability for the bucket bolts. This produces a good cross rigid belt resulting in excellent straight tracking characteristics. In contrast, most conventional steel cable belts lack elasticity and consequently have to run over truly flat, cylindrical pulleys which increases the risk of belts off tracking.
Description
Additional information
| Brand |
|---|
UZYSKAJ CENĘ
Aby otrzymać propozycję, wyślij swoją aplikację na adres info@dystrybutor-przemyslowy.pl i określ wymagane stanowiska oraz dane firmy.
Specification
| Belt type | Strength | Covers | Belt Thickness | Minimum Pulley Dia. | Approximate Weight | |
| SWB | (N/mm) | (mm) | (mm) | (mm) | (kg/sqm) | |
| SW 800 | 800 | 3+3 | 12.0 | 500 | 18.0 | |
| SW 1000 | 1,000 | 3+3 | 12.0 | 500 | 18.7 | |
| SW 1250 | 1,250 | 4+4 | 13.0 | 630 | 21.0 | |
| SW 1400 | 1,400 | 4+4 | 15.0 | 630 | 24.5 | |
| SW 1600 | 1,600 | 4+4 | 15.0 | 630 | 25.0 | |
| SW 1800 | 1,800 | 4+4 | 15.0 | 630 | 25.5 | |
| SW 2000 | 2,000 | 4+4 | 15.0 | 800 | 26.0 | |
| SW 2500* | 2,500 | 5+5 | 18.0 | 800 | 32.5 | |
Related products
4B Braime 5.5 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime 8.0 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime FDA-NBR Elevator Belt
NBR, FDA White Food Quality belts are designed for use in the food industry. This belt quality has very good oil and fat resistance and meets the requirements for components in contact with food stuffs. Used widely with rice processing, flour mills, dry milk products, salt, sugar and detergents etc.
4B Braime 7.0 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime SBR Elevator Belt – Abrasion Resistant
4B elevator belting is of laminar construction, to give high impact resistance coupled with low stretch at working tension. The EP carcass comprises a woven textile construction having low stretch polyester fabric warp (along its length) and impact resistant polyamide fabric weft (across the width). The low stretch characteristics of the belt are achieved using the high strength textile fabric which is pre-tensioned during the manufacturing process. This process limits the maximum stretch in the belt, at working strength, to 1.5%.
4B Braime 9.0 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime 2.0 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime 4.0 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
