Atlas AD Elevator Buckets
4B Braime AD400 Atlas AD Elevator Buckets
This industrial duty super tough elevator bucket is manufactured from “Nyrim” which is a high-grade nylon/rubber reaction molding. These unique properties offer the elevator bucket the ability to withstand maximum resistance to impact and abrasion. Can be used with many abrasive and corrosive industrial materials, such as: AGGREGATES, CEMENT, GYPSUM, COAL, SAND, ETC. The “AD” elevator bucket can be used with elevator belting or chain. The reduced weight of the elevator bucket, compared to a steel fabricated type, enables extended chain life. The “Nyrim” material is corrosion resistant which also allows for longer bucket life. The “AD” elevator bucket design allows for high capacity capabilities.
Description
Additional information
| Brand |
|---|
UZYSKAJ CENĘ
Aby otrzymać propozycję, wyślij swoją aplikację na adres info@dystrybutor-przemyslowy.pl i określ wymagane stanowiska oraz dane firmy.
Specification
| Nominal size | A | B | C | D | T | Weight | Capacity (L) | Capacity (L) | |||
| Atlas AD bucket | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (kg) | Z2 (total) | Z3 (water) | ||
| AD300 | 300 x 200 | 361 | 202 | 215 | 111 | 14 | 43 | 1.7 | 6.75 | 4.135 | |
| AD400 | 400 x 224 | 424 | 247 | 286 | 156 | 11 | 39 | 2.75 | 14.33 | 9 | |
| AD500 | 500 x 250 | 524 | 274 | 321 | 174 | 12 | 39 | 3.8 | 23.2 | 15 | |
| AD630 | 630 x 280 | 654 | 306 | 363 | 196 | 12 | 39 | 6.8 | 36 | 23.4 | |
Related products
4B Braime 4B Vise Splice
4B Vise Splices are mechanical splices and fasteners for use on most PVC and rubber elevator belts.
Each splice unit is made of three pieces. The outside plates have two different gripping areas. The ribbed gripping area is mounted towards the face of the belt. The opposite end has a series of both longitudinal and axial "teeth." The center plate is symmetrical and cannot be improperly installed around its elongated center hole.
The splice works by using the tension supplied by the belting. This tension on the belt ends pulls the outer plates apart, and forces gripping pressure towards the teeth on the splice unit. The greater the belt tension, the more pressure is exerted on the gripping teeth at the forward end of the splice.
4B Braime 6.0 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime 10.0 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime 11.0 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
