Easifit Elevator Bolts
4B Braime 3/8 x 1-3/4 Easifit Elevator Bolts
4B Easifit elevator bolts are unique in that they employ a hexagon tip. Special installation tools lock onto the tip, keeping the bolt from spinning as the lock nut is tightened. Fanged or square shoulder designs have to “bite” into the belt to keep from rotating during nut installation. Easifit bolts are especially useful for repair jobs where only the elevator buckets and not the belt are being replaced since they eliminate the problem of elongated bolt holes that can no longer accept the square shoulders of other bolt styles.
Description
Additional information
| Brand |
|---|
UZYSKAJ CENĘ
Aby otrzymać propozycję, wyślij swoją aplikację na adres info@dystrybutor-przemyslowy.pl i określ wymagane stanowiska oraz dane firmy.
Specification
| Easifit | Size | Head Diameter | Max. Torque | Package Quantity | Package Weight |
| (in.) | (mm) | (Nm) | (kgs) | ||
| 1/4 x 3/4 | 25 | 12 | 100 | 1.82 | |
| 1/4 x 1 | 25 | 12 | 100 | 1.88 | |
| 1/4 x 1-1/4 | 25 | 12 | 100 | 2.04 | |
| 5/16 x 3/4 | 30 | 25 | 100 | 2.84 | |
| 5/16 x 1 | 30 | 25 | 100 | 3.02 | |
| 5/16 x 1-1/4 | 30 | 25 | 100 | 3.24 | |
| 5/16 x 1-1/2 | 30 | 25 | 100 | 3.48 | |
| 5/16 x 1-3/4 | 30 | 25 | 100 | 3.68 | |
| 3/8 x 1 | 32 | 46 | 100 | 4.56 | |
| 3/8 x 1-1/4 | 32 | 46 | 100 | 4.70 | |
| 3/8 x 1-1/2 | 32 | 46 | 100 | 5.10 | |
| 3/8 x 1-3/4 | 32 | 46 | 100 | 5.50 | |
| 3/8 x 2 | 32 | 46 | 100 | 5.90 |
Related products
4B Braime 11.0 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime 2.5 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime SBR Elevator Belt – Abrasion Resistant
4B elevator belting is of laminar construction, to give high impact resistance coupled with low stretch at working tension. The EP carcass comprises a woven textile construction having low stretch polyester fabric warp (along its length) and impact resistant polyamide fabric weft (across the width). The low stretch characteristics of the belt are achieved using the high strength textile fabric which is pre-tensioned during the manufacturing process. This process limits the maximum stretch in the belt, at working strength, to 1.5%.
4B Braime 9.0 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime 3.5 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime 4B Vise Splice
4B Vise Splices are mechanical splices and fasteners for use on most PVC and rubber elevator belts.
Each splice unit is made of three pieces. The outside plates have two different gripping areas. The ribbed gripping area is mounted towards the face of the belt. The opposite end has a series of both longitudinal and axial "teeth." The center plate is symmetrical and cannot be improperly installed around its elongated center hole.
The splice works by using the tension supplied by the belting. This tension on the belt ends pulls the outer plates apart, and forces gripping pressure towards the teeth on the splice unit. The greater the belt tension, the more pressure is exerted on the gripping teeth at the forward end of the splice.
4B Braime 12.0 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
