GB – Spidex™ Buckets
4B Braime GB130-110+B GB – Spidex™ Buckets
High capacity bottomless elevator bucket system. GB Spidex™ buckets are closely spaced with a series of buckets without bottoms followed by one bucket with a bottom. The material is lifted in a continuous column and the carrying space normally wasted between conventional buckets is fully utilized to achieve much greater capacity. The buckets pick up and discharge conventionally, but care must be taken in the design of the boot and the head.
Description
Additional information
| Brand |
|---|
UZYSKAJ CENĘ
Aby otrzymać propozycję, wyślij swoją aplikację na adres info@dystrybutor-przemyslowy.pl i określ wymagane stanowiska oraz dane firmy.
Specification
| GB bucket | A | B | C | T | Weight | Capacity (L) | Holes | E | F | G | Bucket Spacing | Max. | |
| STANDARD | (mm) | (mm) | (mm) | (mm) | (kg) | Z2 (total) | No. | (dia mm) | (mm) | (mm) | (mm) | Pcs/Mtr | |
| GB130-110-B | 136 | 114 | 51 | 1.5 | 0.3 | 0.5 | 2 | 8.5 | 70 | 22 | 57 | 17.5 | |
| GB130-110+B | 136 | 114 | 51 | 1.5 | 0.36 | 0.5 | 2 | 8.5 | 70 | 22 | 57 | 17.5 | |
| GB180-140-B | 185 | 139 | 65 | 1.5 | 0.45 | 1.18 | 2 | 9 | 100 | 32 | 71 | 14 | |
| GB180-140+B | 185 | 139 | 65 | 1.5 | 0.55 | 1.18 | 2 | 9 | 100 | 32 | 71 | 14 | |
| GB230-165-B | 237 | 163 | 71 | 2 | 0.83 | 2.1 | 2 | 10 | 120 | 32 | 80 | 12.5 | |
| GB230-165+B | 237 | 163 | 71 | 2 | 1.12 | 2.1 | 2 | 10 | 120 | 32 | 80 | 12.5 | |
| GB300-165-B | 305 | 166 | 80 | 2 | 1.1 | 2.75 | 3 | 10.5 | 90* | 36 | 88 | 11.4 | |
| GB300-165+B | 305 | 166 | 80 | 2 | 1.4 | 2.75 | 3 | 10.5 | 90* | 36 | 88 | 11.4 | |
| GB350-200-B | 355 | 200 | 100 | 2.5 | 1.95 | 4.75 | 4 | 11 | 90 | 42 | 111 | 9 | |
| GB350-200+B | 355 | 200 | 100 | 2.5 | 2.5 | 4.75 | 4 | 11 | 90 | 42 | 111 | 9 | |
| GB400-220-B | 410 | 218 | 115 | 3 | 2.3 | 6.91 | 4 | 11 | 100 | 45 | 125 | 8 | |
| GB400-220+B | 410 | 218 | 115 | 3 | 2.95 | 6.91 | 4 | 11 | 100 | 45 | 125 | 8 |
Related products
4B Braime 9.0 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime 5.5 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime 4B Vise Splice
4B Vise Splices are mechanical splices and fasteners for use on most PVC and rubber elevator belts.
Each splice unit is made of three pieces. The outside plates have two different gripping areas. The ribbed gripping area is mounted towards the face of the belt. The opposite end has a series of both longitudinal and axial "teeth." The center plate is symmetrical and cannot be improperly installed around its elongated center hole.
The splice works by using the tension supplied by the belting. This tension on the belt ends pulls the outer plates apart, and forces gripping pressure towards the teeth on the splice unit. The greater the belt tension, the more pressure is exerted on the gripping teeth at the forward end of the splice.
