4B Braime
4B Braime 3/8 x 1-3/4 Easifit Elevator Bolts
4B Easifit elevator bolts are unique in that they employ a hexagon tip. Special installation tools lock onto the tip, keeping the bolt from spinning as the lock nut is tightened. Fanged or square shoulder designs have to "bite" into the belt to keep from rotating during nut installation. Easifit bolts are especially useful for repair jobs where only the elevator buckets and not the belt are being replaced since they eliminate the problem of elongated bolt holes that can no longer accept the square shoulders of other bolt styles.
4B Braime 3/8 x 2 Easifit Elevator Bolts
4B Easifit elevator bolts are unique in that they employ a hexagon tip. Special installation tools lock onto the tip, keeping the bolt from spinning as the lock nut is tightened. Fanged or square shoulder designs have to "bite" into the belt to keep from rotating during nut installation. Easifit bolts are especially useful for repair jobs where only the elevator buckets and not the belt are being replaced since they eliminate the problem of elongated bolt holes that can no longer accept the square shoulders of other bolt styles.
4B Braime 3×2 CC-S Elevator Buckets
A unique patented design, the CC-S® elevator bucket range offers greater capacities, longer life and cleaner discharges all in a stackable form for substantial freight and storage space savings. The complete CC-S® range of 35 different sizes is moulded from premium virgin white polymer material for ultimate strength and durability.
4B Braime 4.0 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime 4.5 Gripwell Elevator Belt Splices
The Gripwell light duty aluminum fastener secures belting on bucket elevators. The two ends of the belt are gripped between extruded serrated plates, clamped together by zinc plated high tensile bolts, safely secured by plated self locking nuts to give a strong reliable and rustproof fastener. The Gripwell forms a butt joint, the belt runs smoothly over the pulley with minimum stress to the joint and no relative movement can take place between the two belt ends, as is the case when an overlapping joint passes over the pulleys.
4B Braime 4B Junction Boxes
For use on any application where an ATEX, IECEx or CSA approved junction box is required.
The HOTBOX Junction box is an CSA, ATEX and IECEx approved terminal box which complies with the required standards to enable it to be used in Zone 21 and Class ǁ, Div 2, Groups F and G environments. There are three type available: 6 Terminal, 12 Terminal and DIN rail only with an Earth terminal. The total allowed power dissipation 11.5W.
(Note: The power rating stated above can only be achieved with correct electrical and mechanical installation procedures.)
4B Braime 4B Vise Splice
4B Vise Splices are mechanical splices and fasteners for use on most PVC and rubber elevator belts.
Each splice unit is made of three pieces. The outside plates have two different gripping areas. The ribbed gripping area is mounted towards the face of the belt. The opposite end has a series of both longitudinal and axial "teeth." The center plate is symmetrical and cannot be improperly installed around its elongated center hole.
The splice works by using the tension supplied by the belting. This tension on the belt ends pulls the outer plates apart, and forces gripping pressure towards the teeth on the splice unit. The greater the belt tension, the more pressure is exerted on the gripping teeth at the forward end of the splice.
4B Braime 4B102NA Bolt ‘n’ Go Conveyor Chains – Forged
The Bolt ‘N’ Go flight system is a revolutionary assembly method for drop forged chains. Link and flight assembly is made easy by using a standard bolt and mechanical lock nut with a high strength, heat treated hollow pin. There are no circlips and no intricate assembly is required. There is no welding of flights, no need to remove chain from the conveyor for installation, and no issues with strength. Just bolt the links and the flights together. It’s easy, simple and reliable!
